- SSPC Certified PCS #1056-961-1436
- NACE Certified III CIP #1368
- NACE Peer Review Board Member
Over 320 years of combined experience…
Principal; Senior Corrosion Specialist
Mr. Greenfield has worked in the corrosion industry for over 35 years with a strong background in aerospace and defense support equipment and infrastructure. He is a long-standing participating member of both NACE International and SSPC, in addition to other related industry professional and technical associations.
Mr. Greenfield has worked nationally and internationally in support of critically important projects including overseas military installations, industrial sites, commercial facilities, and large exhibit aquaria. His entire career has been singularly focused on corrosion and the preservation of clients’ physical assets.
D. TERRY GREENFIELD
Mr. Greenfield has over 40 years of experience in the protective coatings and corrosion industry providing program and project management, quality assurance, condition assessment and maintenance planning, specification development, failure analysis, expert witness, and training for the Marine, Transportation, Oil & Gas, and other industries. Mr. Greenfield has extensive International experience in both Asia and the Middle East. He is currently serving in a 5-year appointment to Petroleum University of China-Beijing Subject Matter Expert Group for “Overseas Expertise Introduction Project for Discipline Innovation”.
Mr. Greenfield is the current President of NACE International (2019-2020). He has been an instructor for NACE International since 1997 for the Coating Inspector Program and Corrosion Assessment Programs. Mr. Greenfield was one of the primary authors of the NACE International Offshore Corrosion Assessment Training and Shipboard Corrosion Assessment Training courses as well as the CIP2 Marine course. He is active within NACE International serving on various committees and task groups, including Past Chairman of the CIP Sub-Committee and Past Chairman of STG-04, Coatings and Linings, Protective: Surface Preparation. He has served as the NACE International Delegate to the IMO (International Maritime Organization) and is extensively published.
LOUIS G. MACDOWELL
Senior Corrosion Engineer
Mr. MacDowell has worked in the corrosion industry for over 30 years, spending most of his time working as a Branch Chief and Senior Materials Engineer at Kennedy Space Center’s NASA Materials Science Laboratory. He has traveled extensively providing cathodic protection and corrosion consulting for CONSULEX®’s clients; and brings a wealth of corrosion experience to the team.
V. DWAYNE BACK
Project Manager/Lead Inspector
Mr. Back has been working in the corrosion control and construction industry for more than 20 years. He began his career as a coatings inspector and has advanced to a corrosion specialist. While Mr. Back specializes in the zoo and aquaria market, he also has extensive experience in structural steel corrosion control relative to the oil and gas industry, government facilities and aerospace markets.
Benjamin T. Bussard
Cathodic Protection Division Manager
Mr. Bussard is a NACE Certified Cathodic Protection Specialist (CP4) and NACE Certified Level 2 Coating Inspector with 24 years of responsible charge performing surveys, design, inspection, and quality assurance. He has a proven and successful performance record managing complex projects from planning through execution to completion utilizing a proactive approach of vision, personnel management, leadership, communication, and organizational skills. Projects have included above ground storage tanks, pipelines (both onshore and offshore), power transmission, water and wastewater, and structural steel coatings.
Michael B. Citarella
Mr. Citarella is a NACE Certified Level 3 Coating Inspector and SSPC.
Protective Coating Specialist with over 10 years’ experience in providing coatings inspection services for various industries including transportation (bridges), offshore oil and gas, transmission towers and other complex steel structures. He performs coatings condition assessments and has implemented all aspects of work including contractor qualification and final inspection. He is experienced in the surface preparation, application and inspection of high-performance coating systems. Mr. Citarella has performed numerous projects, (both foreign and domestic), including pipelines, tanks, plants, offshore platforms, bridges, and military transmission towers. His typical activities include specification review, pre-job conferences, surface preparation and application inspections, holiday/discontinuity testing and protective coatings project documentation.
Mr. Seal is a degreed engineer and NACE Certified Level 3 Coating Inspector with more than 25 years of experience in corrosion control, industrial coatings and linings. He possesses a unique set of qualifications built on an engineering background coupled with ongoing technical training and extensive field experience as a Senior Inspector.
Joe Kadlec, P.E.
Chief Corrosion Engineer
As a Registered Professional Corrosion Engineer and Metallurgical Engineer, and NACE Corrosion Specialist with over 50 years’ experience, Mr. Kadlec has supervised and conducted over eight hundred corrosion and cathodic protection projects worldwide. This includes cathodic protection investigations, designs, installations, stray current mitigation, induced AC voltage, failure analysis, and special studies for Natural Gas, Oil, Pipeline, Refining and Petrochemical Companies, Industrial and Institutional Organizations, Power Companies, Engineering Firms, and Federal Agencies. His experience includes petroleum, natural gas, propane, ammonia, water, HTHW, steam and chilled water lines, HVAC power pipelines; fuel, oil, water, waste, and other storage tanks; sewage facilities and lift stations, power generating facilities, hydraulic elevator/hoist cylinders, geothermal earth loop systems, dock and pier structures, communication and electric cables, piles, reinforced concrete and other metallic facilities in underground, marine, fresh water and other environments. Mr. Kadlec’s experience with DOD work includes fifteen direct contracts, along with more than one hundred subcontracts with large and small Architect-Engineer firms.
960 N. Cocoa Blvd. (32922)
P.O. Box 126
Cocoa, FL 32923-0126
+1 (321) 631-2659
Dun & Bradstreet No.: 15-0413719
NAICS Code: 541330
SIC Code: 8711
Cage Code: 4MRL7
Experian BIN # 405397600